Composition: Elemental Sulfur (S) in liquid form - 50% (±2%).
Purpose
Highly effective liquid micronutrient fertilizer with biofungicidal and insecticidal properties, designed to increase the availability of bioactive sulfur for agricultural crops. Effectively eliminates sulfur deficiency in plants without causing leaf burns. Promotes increased protein and gluten content in wheat, and higher oil content in sunflower, soybean, and rapeseed.
WHO classification, toxicity: Class IV. Low-hazard substance.
Compatibility with other products. Compatible with all known pesticides and agrochemicals.
Application
Before spraying, calculate the required amount of product based on application rate and field area using the table below. Prepare the working solution and fill the sprayer on specially equipped sites.
Pour the required amount of product into the sprayer tank filled one-third with clean water, switch on the mixer, and after 10–15 minutes (without turning it off), add the remaining water. Continue mixing during spraying to ensure solution uniformity.
Application Rates of MBS Bio-Sulfur Working Solution
|
Treated crop |
Application |
Application method, |
Max |
|
Winter wheat, |
0,1-0,2 L/100 L of water |
Foliar feeding: tillering phase, stem elongation – flag leaf, beginning of grain filling |
2-3 |
|
Sunflower |
0,1-0,2 L/100 L of water |
Foliar feeding: 3–4 leaf pairs, 5–6 leaf pairs |
2 |
|
Corn |
0,1-0,2 L/100 L of water |
Foliar feeding: 3–5 leaves, 7–9 leaves |
2 |
|
Rapeseed |
0,1-0,2 L/100 L of water |
Foliar feeding: 5–8 leaves, stem elongation, budding phases |
3 |
|
Soybean, peas |
0,1-0,2 L/100 L of water |
Foliar feeding: 3–5 true leaves, budding, bean formation phases |
3 |
|
Sugar beet |
0,1-0,2 L/100 L of water |
Foliar feeding: before row closure, before inter-row closure |
2 |
|
Vegetables |
0,1-0,2 L/100 L of water |
Foliar feeding: before flowering, repeat every 10–12 days |
3 |
|
Fruit and berry crops |
0,1-0,2L/100L of water |
Foliar feeding: before flowering, repeat every 10–12 days |
3 |
|
Field, vegetable, fruit and berry crops |
1-2L/100L of water |
Soil application for the main or pre-sowing treatment for prevention of pathogenic microflora (sclerotinia, bacterial wilt, nematodes, etc.) |
1 |
|
0,5-1 L / 100 L of water |
Prevention and protection against bacterial and fungal diseases (gray mold, alternaria, powdery mildew, rust, scab, anthracnose, ascochyta) |
2 |
|
|
0,5-1L / 100L of water |
Pest control (mites and larvae) |
1-2 |
Working solution application rate: 200-300L/ha – for field crops; 300-1000L/ha for vegetables and fruit/berry crops.
The working solution should not be stored for long periods, therefore it must be prepared immediately before use in quantities not exceeding current needs. Precipitation, falling 6 hours after spraying, does not affect product efficacy.
Application recommendations. All spraying equipment before spraying must be carefully calibrated with respect to the sprayer speed, the sprayer width, the working solution flow speed and uniformity. Spraying is recommended in the morning (before 10–11) or evening (18–22) hours under minimal upward air currents. Do not spray at temperatures above +22°C. The wind speed during spraying should not exceed 3m/s – for fine-drop spraying, 4m/s – for coarse-drop spraying. After spraying, thoroughly wash sprayers and other equipment with water.
Attention! Always check product compatibility before preparing tank mixtures!
Attention! Mixing of tank mixture components (growth regulators, pesticides, micronutrients, etc.) must be done only in water!
Safety precautions: The fertilizer is safe for the environment, people, animals and insects. In case of contact with skin or eyes, rinse with water.
Warranty shell life: 2 years from the manufacturing date in intact factory packaging at temperatures between 5°С and 30°С.
Developer: «Mineralis Ukraine» +38 (044) 286-77-05
Prducer: Eco Bio Holding Co., Ltd. 5 seon-Ro 26 Gil Seocho-Gu Seoul Korea.
Shake well before use.